Home | » Products | » Cutting Tools | » Cutting Tools |
When the job demands drilling large diameter holes through structural steel or pipe as quickly and easily as possible, there is only one way to get it done with broach cutters. Built to perform on the job site or in the shop.
Broach cutter only cuts a slot | Regular drill cut the entire hole, turning the core into chips |
The remaining core is a solid cylinder | 3 - 5 times greater working time |
Cutting work is shortened by one third | Large holes require pre-drilling |
Remove material from only the cutter periphery of the hole require. Ejecting a slug. At the end of operation. So, it require less horse power. To make clean holes. Tooling is available to adapt broach cutter quickly and easily to mag base drill.
Size | Twist drill | Broach cutter | Slug dia |
28 mm | 100% | 48% | 20 mm |
40 mm | 100% | 30% | 32 mm |
60 mm | 100% | 17% | 52 mm |
Allcut broach cutter TCT & HSS Dia 14 to 100 mm (50/75/100 Length)